
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX155-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 155mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X155-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 50 mm. This creates a usable stroke window of 105-155 mm, enabling precise end-position tuning at commissioning without adding external stops.
This SKU is built with an SUS420J2 stainless steel rod (option A) for improved corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides. While the rear adjuster and variable air cushions decelerate the load, neither acts as a lock; for position holding without live air, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 105-155 mm window during machine commissioning without swapping physical cylinders.
Quickly adjust the retract stroke by up to 50 mm to accommodate varying part sizes on a single production line.
If you need higher force, stepping up to the 40 mm bore yields 628 N. An adjustable stroke is preferred over a fixed SAI cylinder when you need to fine-tune the retract position on the fly. To match this ISO 15552 cylinder, verify the 155 mm nominal stroke, 50 mm adjustment, PT G1/8 port, and Basic/FA/LB/TC/FTC/TCM1/TCM2 mounting set. The 12 mm rod and M10x1.25 thread handle standard loads, but always guide lateral forces externally.
AirtacDistr lists every SAIJ32-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-sus-adjustable-cylinder
Quick checklist
At the maximum 1.0 MPa pressure, it yields up to 82 kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the 155 mm nominal stroke by up to 50 mm, providing a usable travel window of 105-155 mm. It only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.