verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-75

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX155-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 155mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke155 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$85.11 $92.61Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-75

The AirTAC SAIJ32X155-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 75 mm. This creates a highly flexible 80-155 mm usable window, letting you fine-tune the retract end position during commissioning without bolting on external stops.

This 32 mm bore unit uses a PT tapered port and features a SUS420J2 stainless steel rod for improved corrosion resistance. The extruded aluminum barrel includes sensor grooves on both sides, ready for AirTAC CMSE reed or DMSE solid-state switches if a magnet is added later. The rear adjuster acts purely as a travel stop to set the end position and does not hold the load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-75 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32AX155-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke155 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-75

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×155Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-75 Is Used

tune

Product Changeover Tuning

Dial in the retract end position by up to 75 mm when switching between part lengths on a packaging line, eliminating the need to physically swap cylinders for each new product run.

precision_manufacturing

Fixture Positioning

Set precise end-stops during machine commissioning to guarantee a clamping fixture travels exactly between 80 and 155 mm, accommodating varying raw material thicknesses.

settings_input_component

Adjustable Ejector Stroke

Vary the ejection distance on an assembly station without adding mechanical external stops, using the rear screw to shorten the stroke exactly to the required part ejection length.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-75 the Right Cylinder?

Choose this specific 75 mm adjustment variant when your machine setup requires a wide variable end-stop range to accommodate multiple product sizes on a single line. If your application only needs a small 10 mm trim for final positioning, stepping down to a smaller adjustment code avoids unnecessary extended housing.

When replacing an ISO 15552 cylinder, match the 32 mm bore, 155 mm stroke, PT port thread, and the exact 75 mm adjustment code. SAIJ supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets. Because the 155 mm stroke is under 300 mm, side-load stress on the 12 mm rod is moderate, though external guides are still recommended for heavy lateral loads.

AirtacDistr lists every SAIJ32-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-sus-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-75 FAQ

The rear adjusting screw acts as a mechanical stop that lets you shorten the 155 mm nominal stroke by up to 75 mm, providing an effective travel window of 80 to 155 mm. It sets the end position and deceleration, but it is not a lock and will not hold the load without live air pressure.

At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf of push force.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX155-75

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ32AX155-75 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.