
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX160-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X160-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 150 to 160 mm, allowing you to fine-tune the retract end-position by up to 10 mm during commissioning.
This unit features a SUS420J2 stainless steel piston rod and PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. It supports variable air cushions at both ends and operates at speeds of 30 to 800 mm/s.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX160-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 150-160 mm window during machine commissioning without adding external stops.
Quickly adapt the stroke end-stop on packaging lines when handling slightly different product sizes.
Choose this adjustable-stroke model when a fixed 160 mm SAI cylinder lacks the flexibility needed for product changeovers or precise setup tuning. The rear adjuster acts strictly as a travel stop, not a lock, so it will not hold the load without live air pressure. For position holding without continuous air, consider an external rod lock or the SAIL series. This cylinder uses the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets. Its 160 mm stroke is well within the 1000 mm standard maximum, meaning no external guide is strictly required for side loads, though the 12 mm rod handles standard operational stresses effectively.
AirtacDistr lists every SAIJ32-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-sus-adjustable-cylinder
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 10 mm, creating a usable travel window of 150 to 160 mm. It functions as a mechanical stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.