
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX170-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 170 mm stroke that can be dialed back by up to 10 mm, giving you a 160-170 mm usable travel window for precise end-position tuning during commissioning.
This variant uses an SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance compared to standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides, and because no magnet is specified here, you would need to select a -S variant to use AirTAC CMSE reed or DMSE solid-state sensors.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX170-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 160-170 mm end position during initial commissioning without machining external stopper blocks.
Quickly shorten the stroke by up to 10 mm to accommodate a slightly smaller product size on a packaging line.
The adjustable stroke is ideal for product changeovers or setups where the exact end-stop needs fine-tuning without swapping out the entire cylinder or adding external stops. Keep in mind the rear adjuster acts only as a travel stop and does not hold the load without live air pressure—if you need true load-holding, consider the SAIL or BSAI series.
For an exact ISO 15552 replacement, match the 32 mm bore, 170 mm stroke, 10 mm adjustment range, PT tapered port thread, and the SUS420J2 rod material. This SAIJ model supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR foot and pivot options. The 12 mm rod and M10x1.25 thread handle moderate side loads, though any stroke over 300 mm would require an external guide.
AirtacDistr lists every SAIJ32-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-sus-adjustable-cylinder
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 10 mm, providing a usable travel window of 160-170 mm. It acts purely as a mechanical stop to fine-tune the end position and does not lock the load without continuous air pressure.
The standard speed range for this bore size is 30-800 mm/s, operating efficiently with a G1/8 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.