
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX170-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel window down to 140-170 mm without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for straightforward detection integration.
This configuration uses a SUS420J2 stainless steel rod for improved corrosion resistance and features PT tapered port threads. The rear adjuster acts strictly as a travel stop for end-position tuning; it does not lock or hold the load without live air pressure. For load-holding requirements without continuous air, an external pilot-operated check valve or a SAIL locking cylinder is required.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX170-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retraction point within the 140-170 mm window during machine setup to accommodate varying material thicknesses without changing hardware.
Quickly adjust the stroke stop on the fly when switching a packaging line to a different carton size, minimizing downtime.
Choose this 32 mm bore when you need precise end-position calibration during machine commissioning or product changeover, as the 30 mm adjustment range lets you dial in the exact 140-170 mm travel without swapping cylinders. Conversely, if lower friction or smaller footprint is needed, you might step down, though 32 mm is often the practical minimum for ISO 15552 mounting interfaces.
Because this model has a 170 mm stroke, side-load risks are moderate, but always ensure the load is guided externally to prevent rod binding. This SAIJ variant supports the reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. It uses PT ports and lacks a magnet; if you need position sensing, select the -S option to use AirTAC CMSE reed or DMSE electronic sensors.
AirtacDistr lists every SAIJ32-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-sus-adjustable-cylinder
Quick checklist
At the maximum pressure of 1.0 MPa, it can deliver up to 82 kgf.
The rear adjuster screw lets you shorten the nominal 170 mm stroke by up to 30 mm, creating a usable travel window of 140-170 mm. The adjuster functions as a mechanical stop to fine-tune the end position and is not a lock; it cannot hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.