
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX170-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that provides a 130 to 170 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
This adjustable model allows precise end-position tuning during commissioning without adding external stops. It features PT tapered ports and a 12 mm rod with an M10x1.25 thread. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX170-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract distance by up to 40 mm during machine setup to dial in exact positioning without swapping hardware.
Quickly adapt the 130 to 170 mm travel window on packaging lines handling varying material sizes.
Use the adjustable stop to set exact clamping or pressing depths on small automated workstations.
The 40 mm adjustment range is ideal for product changeovers requiring variable end stops. For load-holding without continuous air pressure, use an SAIL or BSAI cylinder instead of relying on this adjuster.
As a dimensionally interchangeable ISO 15552 cylinder, it uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the 170 mm stroke is under 300 mm, side-load stress is moderate, but the 12 mm rod still requires an external guide for heavy lateral loads.
AirtacDistr lists every SAIJ32-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-sus-adjustable-cylinder
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear adjuster screw lets you shorten the 170 mm nominal stroke by up to 40 mm, creating a usable travel window of 130 to 170 mm. This stopper only sets the end position and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.