
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX175-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X175-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel. With a nominal 175 mm stroke and a 100 mm adjustment range, this model provides a usable travel window of 75-175 mm. This wide setup latitude lets you dial in the exact retract end-position during commissioning or product changeovers without swapping out the entire unit.
The piston rod is built from SUS420J2 stainless steel (option A) for improved corrosion resistance, and the body uses an extruded aluminum barrel with sensor grooves on both sides. It carries a PT tapered G1/8 port and operates at speeds between 30 and 800 mm/s.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX175-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 75 to 175 mm retract position during machine setup to accommodate different product lengths without adding external spacers.
Quickly readjust the end-of-stroke position on automated lines when switching to a new package size, minimizing downtime between production runs.
Fine-tune the final retract position at commissioning to compensate for mechanical tolerance stack-up without replacing the cylinder.
The 100 mm adjustment range is ideal for machinery that handles varying product sizes, allowing you to reposition the retract stop on the fly instead of machining external spacers. For strokes of 175 mm, the 12 mm rod and M10x1.25 thread handle moderate side loads, but an external guide is recommended for heavy off-center loads.
This cylinder uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. The rear adjuster acts purely as a travel stop for deceleration and end-position tuning, not a lock, so the SAIJ will not hold a load without live air pressure. For fail-safe load holding, consider the SAIL or BSAI series. Being dimensionally interchangeable per ISO 15552, it can directly replace other ISO 15552 profile cylinders using the same mounting interface.
AirtacDistr lists every SAIJ32-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-sus-adjustable-cylinder
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 175 mm nominal stroke by up to 100 mm, giving an effective adjustable travel window of 75 to 175 mm. It only sets the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.