verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-10

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X135-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 135mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke135 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$67.22 $74.72Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-10

The AirTAC SAIJ32X135-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 125-135mm usable travel window, allowing you to dial back the nominal 135mm stroke by up to 10mm during machine commissioning.

This extruded aluminum profile cylinder includes sensor grooves on both sides for flexible switch mounting. It uses a standard carbon steel piston rod with an M10x1.25 thread, and its PT tapered port threads match the G1/8 air supply specification. The rear adjuster acts purely as a mechanical stop to set the end position and does not hold the load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-10 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X135-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke135 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-10

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×135Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-10 Is Used

tune

End-Position Tuning

Fine-tune the retract distance within a 125-135mm window to perfectly seat delicate components without machining custom spacers.

settings_input_component

Machine Changeover

Quickly adjust the stroke by up to 10mm when switching between product sizes on a packaging line, minimizing downtime.

precision_manufacturing

Assembly Fixtures

Dial in the exact clamping reach for small 32mm bore operations, ensuring consistent part alignment during automated assembly.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-10 the Right Cylinder?

Choose this 32mm bore adjustable-stroke cylinder when an application requires precise end-position tuning without adding external stops or swapping components. If your setup needs higher thrust, stepping up to the 40mm bore increases push force to 628N at 0.5 MPa; if less force is acceptable, this 32mm bore is the optimal lightweight choice. Because the 135mm stroke is under 300mm, side-load risks are minimal, though the 12mm rod diameter still requires alignment for optimal seal life.

When ordering an exact ISO 15552 replacement, verify the 135mm stroke, 10mm adjustment range, PT port threads, and the standard carbon steel rod material. Note that this unit does not include a magnet (-S), so it will not trigger AirTAC CMSE reed or DMSE electronic sensors. For applications requiring positive load-holding without continuous air pressure, consider the SAIL or BSAI series instead of relying on the rear stopper.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-10 FAQ

The rear adjusting screw acts as a mechanical stopper, allowing you to shorten the effective stroke from 135mm down to 125mm. It sets the travel end but does not lock or hold the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X135-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.