
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X135-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 135mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X135-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated rear stroke adjuster. It provides a nominal 135 mm stroke that can be mechanically trimmed back by up to 100 mm, yielding a highly flexible 35-135 mm usable travel window for precise end-position calibration.
Unlike fixed-stroke actuators, this model allows you to dial in the exact retract distance during commissioning without adding external stops. The extruded aluminum barrel incorporates sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. It features a carbon steel piston rod with an M10x1.25 thread, and the rear adjuster acts strictly as a travel stop, meaning it will not hold a load safely without continuous live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract stroke from 35 to 135 mm on packaging lines to accommodate varying box sizes without physically changing the actuator hardware.
Perfect for test rigs where the exact end-of-stroke stopping point is unknown, allowing engineers to find the optimal position mechanically rather than via software limits.
Fine-tune the end position during initial commissioning to absorb mechanical tolerances in the machine frame, ensuring precise alignment before locking down the sequence.
Choose this 32 mm bore if your application requires a broad adjustment range within a compact footprint; stepping up to a 40 mm bore would increase the 0.5 MPa push force to 628 N for heavier payloads. The 100 mm adjustment capacity is ideal for prototyping or machinery where product dimensions frequently change, completely bypassing the need to physically swap out an SAI fixed-stroke cylinder. For any load-holding requirements during an air pressure loss, consider an AirTAC SAIL pneumatic lock or BSAI clamp-lock cylinder, as the SAIJ adjuster and its variable air cushions function only as end-of-stroke deceleration stops. To match this ISO 15552 interchangeable cylinder, specify a 32 mm bore, 135 mm stroke, 100 mm adjustment, PT tapered port thread, and your required mounting from the reduced SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw acts as a mechanical stop that can shorten the 135 mm nominal stroke by up to 100 mm, providing a usable travel window of 35-135 mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.