
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X135-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 135mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X135-50 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 135 mm travel by up to 50 mm. This creates a usable end-position window of 85 to 135 mm, letting you fine-tune the retract distance at commissioning without adding external stops.
The 12 mm carbon steel rod and M10x1.25 thread provide a compact interface for lighter-duty applications, while the extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. SAIJ uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X135-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 85 to 135 mm during product size changeovers on a packaging line without swapping cylinders.
Fine-tune the final end position during machine commissioning to perfect a delicate pressing operation using the 50 mm adjustment range.
Provide a flexible travel window for automated assembly stations where multiple parts are processed at slightly different depths.
If your application requires less force, stepping down is not an option within the SAIJ range, but if you need significantly more thrust, the 40 mm bore provides 628 N at 0.5 MPa. The adjustable stroke is ideal for machine setups requiring product changeovers, replacing a fixed-stroke SAI cylinder when exact end-position tuning is critical.
For load-holding without continuous air pressure, note that the rear adjuster is only a stop, not a lock; you would need to look at the SAIL or BSAI series instead. This configuration uses a PT port thread, carbon steel rod, no magnet, and an ISO 15552 mounting interface.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
The rear adjuster allows you to shorten the effective 135 mm stroke by up to 50 mm, creating a usable travel window of 85 to 135 mm. The adjuster acts as a mechanical stop to set the end position and does not function as a lock to hold the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.