
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X140-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X140-100-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 140 mm stroke by up to 100 mm. This creates a highly flexible usable travel window of 40 to 140 mm, letting you dial in exact end positions at commissioning without swapping out the unit.
Because this is an -S variant, the extruded aluminum barrel includes a magnet for position sensing with AirTAC CMSE reed and DMSE electronic switches, which seat neatly into the sensor grooves on both sides. The rear adjuster acts purely as a mechanical stop for end-position tuning and deceleration alongside the variable air cushions; it is not a lock and will not hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Rapidly adjust the end-stop between 40 and 140 mm when switching product sizes on a packaging line, avoiding physical cylinder replacement.
Fine-tune the exact retract position during setup using the rear screw, hitting precise mechanical endpoints without adding external stopper blocks.
Dial in the optimal stroke length for short-run assemblies, testing various travel distances within the 40-140 mm window to perfect the cycle.
The massive 100 mm adjustment range on this specific SKU is perfect for prototyping cells or machines handling varying product sizes, giving you a variable end-stop instead of committing to a fixed-stroke SAI cylinder. For load-holding without continuous air pressure, you would need to specify a SAIL or BSAI series instead of relying on the SAIJ adjuster.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders via standard mounting dimensions. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, deliberately omitting the FB, CA, CB, and CR variants. Ensure your setup matches the PT port and utilizes the -S magnet for CMSE/DMSE sensor feedback.
Quick checklist
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the nominal 140 mm down to 40 mm. This provides a 100 mm adjustable window for fine-tuning the retract end position at commissioning.
At the maximum pressure of 1.0 MPa, the push force reaches 801 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.