verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-40

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X140-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke140 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$67.22 $74.72Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-40

The AirTAC SAIJ32X140-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 100-140 mm usable travel window, allowing you to dial back the 140 mm nominal stroke by up to 40 mm during commissioning.

This model uses a 12 mm carbon steel rod with an M10x1.25 thread, offering a robust interface for standard loads. The extruded aluminum barrel includes sensor grooves on both sides, and while this unit lacks a magnet, adding a -S piston magnet enables compatibility with CMSE reed and DMSE electronic solid-state switches. The rear adjuster acts purely as a travel stop to fine-tune end positions without adding external stops.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-40 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X140-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke140 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-40

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×140Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-40 Is Used

tune

Machine Changeover

Dial in the 100-140 mm travel window during product size changes without physically replacing the cylinder or bolting on external stoppers.

precision_manufacturing

End-Position Tuning

Fine-tune the exact retract position at commissioning using the 40 mm rear adjustment screw to perfect machine timing.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-40 the Right Cylinder?

Choose this 32 mm bore adjustable-stroke cylinder when your application requires variable end-position tuning or frequent product changeovers, avoiding the need to physically swap out a fixed-stroke SAI cylinder.

Because the SAIJ32X140-40 features a 140 mm stroke, it is short enough that an external guide is usually not mandatory, though the 12 mm rod thread handles basic side loads adequately. Remember that the rear adjuster and air cushions decelerate the travel end but do not hold the load without live air; for true fail-safe load holding, consider an external rod lock or the SAIL/BSAI series. This PT-ported (G1/8) cylinder supports the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.

AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-40 FAQ

The rear adjuster acts as a mechanical stop, allowing you to shorten the 140 mm nominal stroke by up to 40 mm, creating a usable 100-140 mm travel window for fine-tuning without changing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-40

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ32X140-40 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.