
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X150-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X150-10 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 150 mm travel by up to 10 mm. This creates a precise 140-150 mm usable window for fine-tuning the retract end position during commissioning without adding external stops. It features a carbon steel piston rod and a PT tapered G1/8 port.
The extruded aluminum barrel includes sensor grooves on both sides, and while this non-magnetic variant lacks position sensing, the rear adjuster functions strictly as a travel stop to set deceleration, not as a lock to hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 140-150 mm retract distance during machine commissioning to compensate for mechanical tolerances without disassembling the actuator.
Quickly adjust the rear stopper by up to 10 mm when switching between slightly different package sizes on a packaging line.
If your setup needs less force, stepping down is not an option below 32 mm in this series, but if you require higher clamping power, the 40 mm bore provides 628 N. The 10 mm adjustment range is ideal for product changeovers where the exact retract distance shifts slightly, replacing the need to physically swap out a fixed-stroke SAI cylinder.
Because the 150 mm stroke exceeds the 100 mm threshold, ensure your setup includes an external guide to support the 12 mm rod against side loads. For load-holding without continuous air pressure, this cylinder will not suffice; consider the SAIL series with an air-released lock or a BSAI clamp-lock instead. When matching ISO 15552 dimensions, specify the 32 mm bore, 150 mm stroke, PT port, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
At the maximum 1.0 MPa pressure, it delivers 82 kgf.
The rear adjuster acts as a mechanical stop that trims the 150 mm nominal stroke back by up to 10 mm, giving a usable travel window of 140-150 mm. It sets the end position and works with the air cushion for deceleration, but it does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.