
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X150-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X150-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 120-150mm usable travel window, allowing you to trim the 150mm nominal stroke by up to 30mm during commissioning.
This extruded aluminum profile cylinder includes sensor grooves on both sides and uses a 12mm carbon steel rod with an M10x1.25 thread. The PT tapered port is G1/8. The rear adjuster acts purely as a mechanical stop to fine-tune the retract position without swapping cylinders; it does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X150-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 120-150mm travel window during product size changes without adding external physical stops to the machine frame.
Fine-tune the retract distance at commissioning to perfect the picking or placing alignment of small components.
The adjustable stroke is ideal for dialing in exact end positions on the fly, whereas a fixed SAI cylinder locks you into one dimension. To match this ISO 15552 replacement exactly, verify the 150mm stroke, 30mm adjustment, G1/8 port, and your mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Because the stroke is under 300mm, side-load stress on the 12mm rod is minimal, though external guides are still recommended for heavy lateral loads. For load-holding without continuous air, use a SAIL or BSAI variant instead of relying on the adjuster.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
At a maximum 1.0 MPa, it can deliver up to 82 kgf.
The rear adjuster screw lets you shorten the effective stroke by up to 30mm, creating a 120-150mm travel window. It functions as a mechanical stop for end-position tuning and is not a lock, meaning the cylinder cannot hold a load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.