
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X155-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 155mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X155-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 155 mm stroke that can be dialed back by up to 75 mm, yielding a highly flexible 80-155 mm usable travel window for exact end-position tuning.
This extruded aluminum profile cylinder omits heavy tie-rods and includes sensor grooves on both sides. The PT tapered port threads match the standard G1/8 fitting size for this bore. The rear stopper acts purely as a travel limit and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X155-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 80-155 mm travel window during product size changes to set new end positions without physically replacing the cylinder.
Handle varying package sizes on a conveyor by adjusting the rear stopper screw to modify the effective stroke length as needed.
If your setup needs greater thrust, stepping up to the 40 mm bore yields 628 N at the same pressure. The wide 75 mm adjustment range is ideal for prototyping or product changeovers where the exact extend position varies.
For an ISO 15552 replacement match, verify the 155 mm stroke, 75 mm adjuster code, PT port threads, and standard carbon steel rod. Because this is a non-locking adjustable stop, load-holding without live air requires a SAIL pneumatic lock or external rod lock. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
At its maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw allows you to shorten the 155 mm nominal stroke by up to 75 mm, creating an 80-155 mm usable travel window. It functions as a mechanical stop and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.