verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-100

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X160-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke160 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$69.54 $77.04Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-100

The AirTAC SAIJ32X160-100 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 160 mm stroke that can be fine-tuned down by up to 100 mm, creating a highly flexible 60-160 mm usable travel window.

This model features a standard carbon steel piston rod and PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, allowing for the direct mounting of CMSE reed or DMSE electronic switches if position feedback is later required. Adjustment is handled mechanically at the rear, acting strictly as a travel stop rather than a load-holding lock.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-100 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X160-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke160 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-100

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×160Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-100 Is Used

tune

Product Changeover

Dial in the 60-160 mm travel window during format changes on packaging lines, accommodating various carton sizes without replacing the cylinder.

settings_input_component

Variable End-Stop Setup

Use the rear mechanical stop to set precise retraction depths for testing fixtures or delicate probe movements where a fixed stroke is too rigid.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-100 the Right Cylinder?

Choose this 32 mm bore cylinder when an application demands a wide range of motion variability within a compact footprint, as the 100 mm adjustment range allows for significant product size changes without swapping actuators. Conversely, if the load is minimal, this bore provides the smallest standard ISO 15552 footprint available.

When specifying a replacement, ensure you match the 160 mm nominal stroke, the 100 mm adjustment requirement, PT port threads, and the basic mounting interface. Because the nominal stroke is 160 mm, side-loading is minimal, but always guide the load externally for smooth operation. Remember that the rear adjuster only sets the end position; it will not hold the load without live air pressure, so consider an external rod lock or a SAIL cylinder if static holding is required.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-100 FAQ

At its maximum 1.0 MPa pressure, it can deliver up to 82 kgf.

The rear adjuster acts as a mechanical stop that allows you to shorten the effective stroke from its 160 mm nominal length down to as little as 60 mm. It only limits the travel distance and does not lock the load without air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X160-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.