
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X160-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X160-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 130-160 mm usable travel window, allowing you to dial back the nominal 160 mm stroke by up to 30 mm during commissioning without adding external stops.
This extruded aluminum profile cylinder includes sensor grooves on both sides for flexible mounting. It uses a PT tapered port thread and a 12 mm carbon steel rod. The rear adjuster acts purely as a travel stop to fine-tune the end position, meaning it does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X160-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 130-160 mm travel window during format changes on packaging lines without swapping out the entire actuator.
Fine-tune the retract position at machine commissioning to achieve precise mechanical alignment without adding external stopper blocks.
Set different retract distances for testing protocols or multi-stage assembly processes within the 30 mm adjustment limit.
Select the adjustable SAIJ over a fixed SAI when a machine requires variable end-stops across different product runs.
For an exact ISO 15552 replacement, match the 32 mm bore, 160 mm stroke, 30 mm adjustment, PT port thread, and standard carbon steel rod. Since the total stroke is 160 mm, side-load stress is moderate, but always guide the load externally for optimal bearing life. If pneumatic load-holding is required without live pressure, look to the SAIL or BSAI series instead of relying on this adjuster.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
The rear adjuster screw lets you shorten the effective travel from the nominal 160 mm down to 130 mm. This creates a 130-160 mm usable window for setting exact end positions, but it functions as a stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.