
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X165-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X165-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a substantial 100mm adjustment range, allowing you to dial the effective travel down from the 165mm nominal stroke to a minimum of 65mm. This wide window is ideal for prototyping or accommodating multiple product sizes on a single line.
The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. The rear stopper mechanism acts solely as a travel end-deceleration device and does not hold the load without live air pressure. For true load-holding, consider the SAIL or BSAI series. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position from 65 to 165mm during machine commissioning without machining new hard stops.
Quickly adapt the cylinder travel for different product lengths on a packaging line, reducing downtime between batches.
Test multiple stroke lengths on a single fixture by adjusting the rear screw, saving the cost of ordering multiple fixed-stroke cylinders.
If you need less force, a smaller option is not available in this adjusted configuration, but if your force requirements are significantly higher, stepping up to a 40mm bore yields 628N at 0.5MPa. The 100mm adjustment range makes this SKU preferable over a fixed-stroke SAI when you need to frequently change product sizes without swapping cylinders or adding external mechanical stops.
To replace an ISO 15552 cylinder, match the 32mm bore, 165mm stroke, 100mm adjustment, PT tapered port thread, and your required mounting accessory. The 12mm rod with an M10x1.25 thread handles moderate side loads, but because 165mm is a relatively long stroke for a 32mm bore, always use an external guide to prevent rod binding and premature seal wear.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
At 0.9MPa, the push force increases to 724N.
A rear adjuster screw allows you to shorten the effective travel from the 165mm nominal stroke down to 65mm. This stopper only sets the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.