verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-20S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X165-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke165 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$72.34 $79.84Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-20S

The AirTAC SAIJ32X165-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The built-in -20 mm adjustment screw allows you to trim the effective travel, creating a precise 145-165 mm usable window to dial in end positions during commissioning.

This -S variant includes a magnet for position sensing and works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches dropped into the dual-side sensor grooves on the extruded aluminum barrel. It features a 12 mm carbon steel rod, M10x1.25 rod thread, and PT G1/8 tapered ports. The rear stopper acts purely as a travel limit and does not lock the load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-20S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X165-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke165 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-20S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×165Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-20S Is Used

tune

Product Changeover

Dial in the 145-165 mm travel window on the fly when switching between slightly different package lengths on a packaging line.

precision_manufacturing

End-Stop Tuning

Fine-tune the retract position during machine commissioning without swapping out the entire cylinder or adding shims.

settings_input_component

Sensor Integration

Leverage the -S magnet with DMSE electronic sensors to confirm the adjusted end-of-stroke position in automated control systems.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-20S the Right Cylinder?

If your setup demands less force, stepping down is not an option below 32 mm in this series, but stepping up to a 40 mm bore yields 879N at 0.7 MPa. The adjustable stroke is selected over a fixed SAI cylinder when you need variable end-stops for frequent product size changeovers rather than machining custom external stops. For load-holding without continuous air pressure, you must integrate an external pilot-operated check valve or look at the SAIL or BSAI series, as the SAIJ adjuster is only a stop. To match this ISO 15552 replacement exactly, specify the 165 mm stroke, 20 mm adjustment, PT G1/8 port, and the -S magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-20S FAQ

At 0.7 MPa, the push force increases to 563N.

The rear adjuster screw lets you shorten the nominal 165 mm stroke by up to 20 mm, providing a usable travel window of 145 to 165 mm. This stopper only limits travel and does not hold the load without air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X165-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.