
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X165-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X165-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 165 mm stroke that can be dialed back by up to 50 mm, yielding a precise 115-165 mm usable travel window for on-the-fly positioning.
This adjustable model allows fine end-position tuning at commissioning without swapping the cylinder or adding external stops. The rear screw acts purely as a travel stop and works alongside variable air cushions at both ends to decelerate the load; it does not hold the load without live air. Mounting options include the SAIJ subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X165-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 115-165 mm travel window during format changes on packaging lines without swapping hardware.
Fine-tune the final retract position during machine commissioning to achieve precise mechanical alignment.
Adjust the stroke rearward by up to 50 mm to accommodate varying package sizes on a single conveyor.
If your setup demands less force, stepping down is not an option in this series, but stepping up to a 40 mm bore yields 628 N. The adjustable stroke is selected over a fixed SAI when you need commissioning fine-tune flexibility or frequent product-size changeovers.
For an exact ISO 15552 replacement, match the 32 mm bore, 165 mm stroke, 50 mm adjustment, PT tapered port thread, and standard carbon steel rod. Because the rod is 12 mm, ensure external guides support any side-load, especially over this 165 mm stroke. Note that a plain SAIJ does not hold position without live air; for load-holding, consider the SAIL or BSAI series.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 50 mm, creating a 115-165 mm usable travel window. The adjuster is a mechanical stop, not a lock, so the cylinder requires live air to hold its position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.