
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X170-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 170 mm nominal stroke that can be dialed back by up to 20 mm, giving you a precise 150-170 mm usable travel window to fine-tune the retract end position during commissioning.
Because the rear screw acts purely as a mechanical stop and works alongside the variable air cushion, it cannot hold a load without live air pressure. For true fail-safe load holding, you would need an external rod lock or a related SAIL pneumatic lock cylinder. This model supports AirTAC CMSE reed and DMSE electronic sensors via the dual-side sensor grooves on its extruded aluminum barrel.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X170-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 150-170 mm travel window during product size changes to set exact retract positions without replacing the cylinder.
Use the rear adjuster to fine-tune the final position at commissioning, compensating for mechanical tolerances in the fixture.
Choose this 32 mm bore adjustable-stroke cylinder when your application requires exact end-position tuning without adding external stops or swapping components. The SAIJ32X170-20 is dimensionally interchangeable with ISO 15552 cylinders and is configured with a PT G1/8 port, carbon steel rod, and no magnet. The available mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
The rear adjuster allows you to shorten the 170 mm nominal stroke by up to 20 mm, creating a 150-170 mm adjustable travel window. The adjuster acts as a mechanical stop and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.