
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X175-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X175-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 175 mm travel but includes a 10 mm adjustment screw, creating a 165-175 mm usable window for fine-tuning the retract end position at commissioning.
This model uses a carbon steel rod with an M10x1.25 thread and a G1/8 PT port. The extruded aluminum barrel includes sensor grooves on both sides for flexible CMSE or DMSE switch mounting. Remember that the rear adjuster acts only as a travel stop to decelerate the load, not as a lock, so live air is required to hold position.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X175-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 165-175 mm retract position during machine commissioning to seat delicate parts perfectly without mechanical spacers.
Quickly adjust the end-stop by up to 10 mm to accommodate slightly different package sizes on a packaging line.
Fine-tune the travel end during setup to compensate for mechanical wear or slight misalignment in the fixture.
Choose this 32 mm bore when an application requires precise end-stop tuning without adding external stops. For fixed travel without an adjuster, the standard SAI cylinder is a simpler alternative. To hold loads without live air pressure, consider the SAIL or BSAI series instead.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 175 mm stroke, 10 mm adjustment, G1/8 port, and your required mounting set. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR options. For this 175 mm stroke, ensure adequate guidance to prevent rod side-loading.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
A rear screw stopper lets you shorten the effective travel from the 175 mm nominal stroke down to 165 mm. This creates a 10 mm adjustable window for fine-tuning the retract end position without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.