
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X175-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X175-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 135-175 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to add CMSE or DMSE switches later if positioning feedback becomes necessary.
Rather than relying on external stops, the integrated 40 mm adjustment mechanism allows you to fine-tune the retract end position directly during commissioning. This rear adjuster functions strictly as a travel stop and works alongside the standard 27 mm air cushions to decelerate the load, but it does not hold the load without live air pressure. For applications requiring position holding without continuous air, a SAIL or BSAI variant would be required.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X175-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 135-175 mm travel window during product size changes without physically replacing the cylinder or adding external mechanical stops.
Fine-tune the retract stroke end by up to 40 mm during commissioning to perfectly align tooling marks or seating depths.
Provide adjustable actuation endpoints on a conveyor sorting arm where package sizes frequently vary on the same line.
The adjustable nature of this SKU provides a distinct advantage over a fixed-stroke SAI cylinder when machine setups frequently vary.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 175 mm nominal stroke, 40 mm adjustment range, PT port thread, and standard carbon steel rod. Because this is a non-magnet model, it will not work with reed or electronic sensors out of the box. Mounting options are limited to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Since the stroke is under 300 mm, side-load risks are moderate, but always ensure the load is properly guided.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster acts as a stopper that lets you shorten the effective stroke from 175 mm down to 135 mm. It sets the travel end and deceleration point but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.