
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X180-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 180mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X180-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 180 mm stroke that can be fine-tuned down by up to 40 mm, giving operators a precise 140-180 mm usable travel window during commissioning.
This extruded aluminum profile cylinder features a 12 mm carbon steel rod and a PT G1/8 port. It supports variable air cushions at both ends to manage deceleration. The rear adjuster acts purely as a mechanical stop to set the retract position, meaning it will not hold a load without continuous live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 140-180 mm travel window during format changes on packaging lines, avoiding the need to physically swap out the entire cylinder.
Fine-tune the retract position to the exact millimeter during machine commissioning, ensuring precise placement without external mechanical stops.
If your setup needs less force, stepping down is not an option below 32 mm in this series, but stepping up to a 40 mm bore yields 628 N. The adjustable 140-180 mm window is ideal for product changeovers. For load-holding without live air, select a SAIL or BSAI cylinder instead, as the SAIJ adjuster is not a lock.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 180 mm nominal stroke, PT G1/8 port, and the 40 mm adjustment requirement. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the 180 mm stroke is under 300 mm, side-load stress on the 12 mm rod thread is moderate, though external guides are still recommended for optimal longevity.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw allows you to shorten the 180 mm nominal stroke by up to 40 mm, creating a usable travel window of 140-180 mm. This mechanical stop sets the end position but does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.