
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X185-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 185mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X185-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 20 mm. This creates a usable 165-185 mm travel window, enabling precise end-position tuning at commissioning without swapping the unit or adding external stops.
Unlike a fixed-stroke SAI, this model lets you dial in the retract end-stop during product changeovers. The rear adjuster acts purely as a travel stop and works alongside the variable air cushions at both ends to decelerate the motion, but it does not hold the load without live air pressure. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic sensors if a magnet is specified later.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X185-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 165-185 mm retract stop during product size transitions without physically replacing the cylinder or bolting on external stopper blocks.
Fine-tune the final end-of-stroke position at commissioning to absorb mechanical tolerances in your fixture, using the rear adjuster to hit exact targets.
The rear adjuster is ideal for machine setups requiring variable end-stops during product changeovers, whereas a fixed SAI cylinder is better for rigid, non-adjustable travel.
For ISO 15552 replacement matching, ensure the 185 mm stroke and 20 mm adjustment range fit your spatial envelope, and verify the PT tapered port and 12 mm carbon steel rod. Because the stroke is under 300 mm, side-load stress on the 12 mm rod thread is manageable, though long unsupported loads still need an external guide. Note that the SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. If you need true load-holding without live air, select the SAIL or BSAI series instead.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
The rear adjuster screw allows you to shorten the nominal 185 mm stroke by up to 20 mm, providing a usable travel window of 165-185 mm. This stopper fine-tunes the end position but does not lock or hold the load without continuous air pressure.
The operating speed ranges from 30 to 800 mm/s, supported by 27 mm variable air cushions at both ends for smooth deceleration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.