
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X190-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X190-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 190 mm stroke that can be dialed back by up to 100 mm, yielding a wide usable travel window of 90-190 mm for exact end-position tuning during commissioning.
The rear adjustment mechanism acts purely as a mechanical stop to fine-tune the retract distance without swapping out the cylinder or adding external stops. It is important to note that this adjuster is not a locking device; the cylinder cannot hold a load without live air pressure. For applications requiring true load-holding, exploring the SAIL or BSAI series is recommended.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial back the stroke from 190 mm down to 90 mm when switching to a shorter product format on a packaging line, avoiding mechanical cylinder swaps.
Fine-tune the retract end-position during machine commissioning to achieve exact sensor alignment without adding bulky external stopper blocks.
Set precise mechanical stops for delicate pick-and-place operations where the final resting position must be tweaked within a 100 mm window.
Choose this 32 mm bore model when your application requires precise variable end-stops within a 90-190 mm range, stepping down from a 40 mm bore if your force needs are under 628 N at 0.5 MPa. The adjustable stroke is ideal for machine setups that undergo frequent product changeovers, eliminating the need to physically swap a fixed-stroke SAI cylinder.
When matching ISO 15552 replacement dimensions, verify the 190 mm stroke, up to 100 mm adjustment, PT tapered G1/8 port, and standard carbon steel rod. Because this unit lacks a magnet, position sensing via CMSE or DMSE switches is not supported. Furthermore, while the 12 mm rod handles standard loads, any application approaching the 190 mm travel mark should incorporate an external guide to prevent excessive side-loading on the rod.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
It operates at speeds between 30 and 800 mm/s.
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from the nominal 190 mm down to as little as 90 mm. This creates a 90-190 mm usable stroke window for fine-tuning end positions without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.