
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X190-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X190-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. With a nominal 190 mm stroke and a 75 mm adjustment range, it provides a usable travel window of 115 to 190 mm, allowing precise end-position tuning without swapping hardware.
This extruded aluminum profile cylinder includes sensor grooves on both sides for CMSE or DMSE switches, though this specific SKU is configured without a magnet. It features a standard carbon steel piston rod, a PT tapered port thread (G1/8), and variable air cushions at both ends. The rear stopper sets the travel limit but does not lock the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 115 to 190 mm during product line changeovers without fabricating new external stopper blocks.
Fine-tune the end-of-stroke position at commissioning to perfect the placement of light components on a 32 mm bore assembly fixture.
Leverage the wide 75 mm adjustment range to test multiple travel distances on a single prototype rig before finalizing the design.
The 75 mm adjustment window is exceptionally wide, ideal for prototyping or product changeovers where the exact end-stop distance changes frequently. Unlike a fixed-stroke SAI cylinder, this model lets you dial in the retract position mechanically during commissioning.
Because the stroke is 190 mm, the 12 mm carbon steel rod handles moderate side loads, but an external guide is recommended if absorbing lateral forces. For load-holding without continuous air pressure, this cylinder is insufficient—the rear adjuster is a stop, not a lock—so consider an AirTAC SAIL or BSAI model. This SKU is dimensionally interchangeable per ISO 15552 and uses the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster acts as a mechanical stop that lets you trim the effective stroke back from the 190 mm nominal length by up to 75 mm, providing a usable travel window of 115 to 190 mm. It requires live air to move and does not lock the load in place.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.