
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X20-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 20mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a 12mm carbon steel rod and a PT G1/8 port. Because the 20mm nominal stroke matches the adjustment range, the usable travel window is 0-20mm, allowing you to dial the extension back to an exact zero position.
This rear screw acts purely as a travel stop for commissioning and is not a lock, meaning it cannot hold a load without live air. For position holding, an external SAIL lock cylinder is required. The extruded aluminum barrel includes sensor grooves on both sides, and you can add a magnet for CMSE reed or DMSE electronic sensors.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X20-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 0-20mm extension during machine commissioning to accommodate varying product sizes without swapping cylinders.
Quickly reset the rear stopper for short-stroke pick-and-place operations when adapting the production line to new components.
Use the adjustable rear screw to fine-tune the retraction end position in compact assembly fixtures where millimeter accuracy matters.
Choose this 32mm bore when you need precise end-position tuning without adding external stops; if you need more force, stepping up to the 40mm bore provides 628N at 0.5 MPa. The SAIJ32X20-20 is selected specifically for its 0-20mm adjustable travel window, which replaces the need to swap a fixed-stroke SAI cylinder during product changeovers. To match this ISO 15552 interchangeable cylinder exactly, specify the 20mm stroke, 20mm adjustment, PT G1/8 port, and standard carbon steel rod. Since the stroke is under 300mm, side-load stress on the 12mm rod thread is minimal, though external guides are still recommended for heavy lateral loads.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
The SAIJ32X20-20 has a 20mm nominal stroke with a 20mm adjustment code, creating a 0-20mm usable travel window. You turn the rear screw to shorten the effective stroke without changing the cylinder itself.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.