verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-30

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X200-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke200 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$71.41 $78.91Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-30

The AirTAC SAIJ32X200-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. By turning the rear stopper screw, you can trim the 200mm nominal stroke back by up to 30mm, creating a precise 170-200mm usable travel window without adding external stops.

This adjustable feature allows you to fine-tune the retract end-position during commissioning or product changeovers. The extruded aluminum barrel includes sensor grooves on both sides for straightforward positioning of CMSE reed or DMSE solid-state switches. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-30 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X200-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke200 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-30

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-30 Is Used

precision_manufacturing

Machine Setup & Changeover

Dial in the exact 170-200mm retract position during initial commissioning or when switching product fixtures, avoiding physical cylinder swaps.

conveyor_belt

Variable End-Stop Diverter

Fine-tune the stroke length on a sorting lane to accommodate different package sizes without repositioning the cylinder mounting.

tune

Sensor Calibration Rig

Use the rear stopper to precisely set the travel limit for repetitive testing, ensuring the 12mm rod reaches the exact target every time.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-30 the Right Cylinder?

If your application requires less force, stepping down to a 25mm bore offers lighter travel, while stepping up to a 40mm bore yields 628N. The rear adjuster acts purely as a mechanical stop and does not hold the load without live air; for true pneumatic locking, consider the SAIL or BSAI series.

Because the 200mm stroke exceeds the 300mm side-load threshold, an external guide is recommended to prevent rod binding. To match this ISO 15552 footprint, specify the 32mm bore, 200mm stroke, 30mm adjustment, PT G1/8 port, and standard carbon steel rod without a magnet.

AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-30 FAQ

The rear stopper screw allows you to shorten the 200mm nominal stroke by up to 30mm, giving an effective travel window of 170-200mm. The adjuster functions as a travel stop and does not lock the load without continuous air pressure.

At the maximum operating pressure of 1.0 MPa, the push force increases to 801N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-30

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ32X200-30 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.