
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X210-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X210-100-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. By integrating a -S magnet, it supports position sensing via AirTAC CMSE reed or DMSE electronic solid-state switches.
This model provides a generous 110-210 mm usable travel window, allowing you to dial back the 210 mm nominal stroke by up to 100 mm. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting interface covers Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract distance within the 110-210mm window during machine commissioning to dial in exact clamping or ejection points without hardware swaps.
Quickly adapt the stroke on packaging lines when handling different package lengths, using the 100mm adjustment range to accommodate varied formats.
Choose this 32mm bore when you need precise variable end-stops for frequent product-size changeovers, rather than installing fixed external stops or swapping out a standard SAI cylinder. Because the nominal stroke is 210mm, ensure external guides are used to manage side loads on the 12mm rod during extended travel.
The rear adjuster acts strictly as a travel stop for end-position tuning and does not hold the load without live air pressure. For drop-prevention or dead-stop holding without continuous air, select an AirTAC SAIL pneumatic lock or BSAI clamp-lock cylinder instead. This SAIJ unit is dimensionally interchangeable per ISO 15552 standards.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the 210mm nominal stroke down to as little as 110mm. This stop only sets the end position; it does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.