
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X220-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 220mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X220-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 220 mm stroke that can be dialed back by up to 100 mm, creating a wide 120-220 mm usable travel window for highly variable end-position tuning.
This model uses a standard carbon steel rod with an M10x1.25 thread and a G1/8 PT port. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches. The rear adjuster functions strictly as a mechanical stop to fine-tune travel, not as a load-holding lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X220-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retraction point between 120 and 220 mm during machine commissioning to accommodate varying material lengths without external stopper blocks.
Rapidly adjust the effective stroke up to 100 mm when switching between product sizes on a packaging line, minimizing downtime and physical retooling.
Provides precise, repeatable end-positioning for small part pressing or locating tasks where the final travel distance needs occasional mechanical fine-tuning.
Select this 32 mm bore unit when an application requires significant on-the-fly stroke adjustments without swapping cylinders, offering a 120-220 mm travel window. If your process requires less than 120 mm of travel, step down to a smaller adjustment code or shorter standard SAI cylinder.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 220 mm stroke, 100 mm adjustment range, G1/8 PT port, and standard carbon steel rod. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the total stroke is 220 mm, ensure external guides support the load to prevent excessive side-loading on the M10x1.25 rod. For load-holding without live air pressure, use an external rod lock or select an AirTAC SAIL or BSAI model instead.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
It can reach a maximum of 82 kgf at 1.0 MPa.
The rear adjusting screw acts as a mechanical stop that shortens the effective stroke. For this 220 mm nominal stroke cylinder, you can trim the travel back by up to 100 mm, yielding a usable 120-220 mm window. The adjuster only sets the end position and does not hold the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.