
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X250-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 250mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X250-20 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a usable travel window of 230 to 250 mm, allowing you to dial back the nominal 250 mm stroke by up to 20 mm during machine setup.
This model features a 12 mm carbon steel piston rod with an M10x1.25 thread and a PT G1/8 port. The extruded aluminum barrel includes sensor grooves on both sides for mounting AirTAC CMSE reed or DMSE electronic sensors. Variable air cushions at both ends help decelerate the moving load, but the rear adjuster acts only as a travel stop, not a load-holding lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X250-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retraction end position within the 230-250 mm window during machine commissioning to dial in exact clamping or positioning distances.
Quickly adjust the travel limit on a packaging line when switching to a different carton size, avoiding the need to physically swap cylinders.
Choose this 32 mm bore adjustable-stroke cylinder when your application requires fine end-position tuning at commissioning or during product changeover without swapping out the entire actuator or adding external stops. If your process demands higher thrust, stepping up to a 40 mm bore increases the 0.5 MPa push force to 628 N. For holding a load securely without continuous live air pressure, this standard SAIJ is insufficient; consider an SAIL air-released lock or BSAI clamp-lock cylinder instead.
Because the 250 mm stroke is relatively long for a 32 mm bore, the unsupported rod length increases susceptibility to side-loading; an external guide bearing is recommended to prevent rod deflection and premature seal wear. To match this ISO 15552 interchangeable footprint exactly, specify the 32 mm bore, 250 mm stroke, 20 mm adjustment range, PT G1/8 port, and your required mounting accessory from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
At the maximum pressure of 1.0 MPa, it can deliver up to 82 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective travel from the 250 mm nominal stroke down to 230 mm. This allows precise end-position tuning without adding external stops, though it does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.