
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X250-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 250mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X250-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 220-250 mm usable travel window, allowing you to dial back the 250 mm nominal stroke by up to 30 mm during commissioning.
This bore size features a 12 mm carbon steel rod and M10x1.25 thread, which handles basic loads but still requires an external guide for this 250 mm stroke. It uses a PT tapered G1/8 port and includes variable air cushioning at both ends. The extruded aluminum barrel integrates sensor grooves on both sides for CMSE reed or DMSE electronic switches, though a magnet is not specified for this configuration.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X250-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 220-250 mm travel window during product size changes without replacing the entire cylinder assembly.
Fine-tune the retract position at commissioning using the rear screw stopper to perfect the final placement.
Adjust the actuating stroke on a packaging line diverter to accommodate varying package lengths on the fly.
The rear adjuster acts solely as a travel stop and does not hold the load without live air pressure. For true load-holding requirements, consider the SAIL or BSAI series instead.
This model is dimensionally interchangeable per ISO 15552 standards. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options. To match this exact configuration, specify a 32 mm bore, 250 mm stroke, 30 mm adjustment, PT G1/8 port, carbon steel rod, and no magnet.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
The rear adjuster screw acts as a mechanical stop that shortens the effective travel. For this model, it creates a 220-250 mm usable window, allowing you to trim the 250 mm nominal stroke by up to 30 mm without moving the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.