
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X260-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X260-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 230 to 260 mm usable travel window, letting you dial back the nominal 260 mm stroke by up to 30 mm during machine commissioning.
The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches. The standard carbon steel rod has an M10x1.25 thread, and the rear adjuster serves as a travel stop to fine-tune end positions without adding external stops. It is not a lock and will not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X260-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 230 to 260 mm travel window at startup without swapping cylinders or machining external stoppers.
Quickly adjust the retract end-position on packaging lines when handling slightly different product lengths.
Dial in the exact stroke length needed for delicate operations using the 30 mm rear adjustment screw.
Choose this 32 mm bore model when you need precise end-position tuning on a 260 mm stroke. The adjustable stroke is ideal for product changeovers where the exact end-of-stroke varies, unlike a fixed SAI cylinder. Since the stroke is 260 mm, ensure adequate guidance to prevent excessive side loads on the M10x1.25 rod thread.
For an exact ISO 15552 dimensional replacement, match the 32 mm bore, 260 mm stroke, 30 mm adjustment, PT tapered port threads, and the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the SAIJ series omits FB, CA, CB, and CR mounts. This unit uses a standard carbon steel rod and does not include a magnet for sensors.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
The rear adjuster acts as a travel stop, allowing you to shorten the effective stroke from 260 mm down to 230 mm. It only sets the end position and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.