
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X280-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 280mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X280-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a usable travel window of 270-280 mm, allowing you to dial back the nominal 280 mm stroke by up to 10 mm.
This model features a carbon steel piston rod and a PT tapered port thread. The extruded aluminum barrel includes sensor grooves on both sides, and the included magnet supports CMSE reed and DMSE electronic switches for exact position feedback. It uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X280-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 270-280 mm travel window during product size transitions to set exact retract positions without adding physical spacers.
Dial in the exact end-of-stroke position during commissioning to accommodate minor mechanical variations in new machinery setups.
Leverage the dual sensor grooves and built-in magnet to mount CMSE or DMSE switches exactly at your newly adjusted stopping point.
If you need to step up to the 40 mm bore, you will get 879 N at the same pressure, while dropping down is not an option below 32 mm in this series. The adjustable stroke is ideal for machine setup and product changeover, letting you fine-tune the retract end-stop without swapping the cylinder.
Because the 280 mm stroke is a long travel distance for a 32 mm rod, an external guide is recommended to prevent excessive side-loading on the rod. The rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding without pressure, consider the SAIL or BSAI series. This cylinder is dimensionally interchangeable per ISO 15552 standards.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
The rear adjuster screw lets you shorten the effective stroke from the nominal 280 mm down to 270 mm. This creates a 270-280 mm usable travel window, allowing you to set the exact retract end-position during commissioning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.