verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X375-40

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X375-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 375mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke375 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$88.16 $95.66Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X375-40

The AirTAC SAIJ32X375-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 335 to 375 mm, allowing you to dial back the nominal stroke by up to 40 mm during machine commissioning.

This model uses a 12 mm carbon steel piston rod with an M10x1.25 thread, paired with a PT tapered port and 27 mm cushions at both ends. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet. It supports the standard SAIJ mounting set, including Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X375-40 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X375-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke375 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X375-40

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×375Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X375-40 Is Used

tune

Machine Commissioning

Fine-tune the 335-375 mm travel window during setup to dial in exact end positions without machining external stops.

settings_input_component

Product Changeover

Quickly adjust the retract distance up to 40 mm to accommodate varying product sizes on the same production line.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X375-40 the Right Cylinder?

Choose this 32 mm bore adjustable cylinder when you need precise end-position tuning without adding external stops or swapping components. The rear adjuster acts solely as a travel stop to fine-tune deceleration; it does not hold the load without live air pressure. For true load-holding, consider the SAIL or BSAI series.

Because the 375 mm stroke is relatively long for the 12 mm rod diameter, external guiding is recommended to prevent excessive side-loading and rod deflection. As a dimensionally interchangeable ISO 15552 cylinder, it replaces equivalent profile cylinders using the exact bore, stroke, 40 mm adjustment, PT port, and specified mounting accessories.

AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X375-40 FAQ

At 0.7 MPa, the push force increases to 563 N.

The rear adjuster allows you to shorten the effective travel from the 375 mm nominal stroke down to 335 mm. This stopper fine-tunes the end position but does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X375-40

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ32X375-40 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.