
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X40-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 40mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X40-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 40 mm stroke that can be dialed back by up to 10 mm, giving you a 30-40 mm usable travel window for precise end-position tuning at commissioning.
This adjustable stopper allows you to fine-tune the retract end without swapping the cylinder or bolting on external stops. The extruded aluminum barrel includes sensor grooves on both sides, and the carbon steel rod with an M10x1.25 thread handles standard side loads well. It uses a PT tapered port and offers variable air cushions at both ends to decelerate the load smoothly.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X40-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 30-40 mm retract position during commissioning without disassembling the fixture or adding external shims.
Quickly adjust the end-stop by up to 10 mm on a packaging line when switching between slightly different product sizes.
Use the rear screw to set a precise retract stop for low-force pick-and-place tasks requiring 402 N or less.
An adjustable stroke is selected over a fixed SAI when you need a variable end-stop for product changeovers or machine setup. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air—use an external rod lock or a SAIL cylinder if load-holding is required.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 40 mm nominal stroke, 10 mm adjustment range, PT port thread, and standard carbon steel rod. Since the stroke here is under 300 mm, side-load stress on the rod is minimal, but always ensure the load is guided for long-term seal durability.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
It features a rear adjusting screw that acts as a stopper, allowing you to shorten the effective stroke by up to 10 mm. This creates a 30-40 mm usable travel window for fine-tuning the end position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.