
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X45-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 45mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X45-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the retract end position. With a nominal 45 mm stroke and a 10 mm adjustment range, it provides a usable travel window of 35 to 45 mm. This enables precise end-position tuning at commissioning without swapping the cylinder or adding external stops.
This 32 mm bore profile cylinder incorporates adjustable air cushions at both ends to decelerate the load smoothly. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for position holding without pressure, consider the SAIL or BSAI variants. It supports a speed range of 30-800 mm/s and uses a carbon steel rod with an M10x1.25 thread.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X45-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 35-45 mm retract position during product size changes without physically replacing the cylinder or adding shims.
Perfect for dialing in the final few millimeters of travel during commissioning to prevent over-travel and ensure precise mechanical contact.
Ideal for light-force assembly tasks (402 N at 0.5 MPa) where the exact end position needs slight field adjustment to meet sensor targets.
The SAIJ32X45-10 uses a PT tapered port thread, a carbon steel rod, and includes no magnet. It is dimensionally interchangeable per ISO 15552 mounting interfaces. For any stroke of 300 mm or more, an external guide is recommended to handle side loads, though this 45 mm stroke is well within standard limits.
The mounting options are a subset of the standard SAI series, including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. If you need load-holding without live air pressure, this cylinder's adjuster will not act as a lock; you should look to the SAIL (air-released lock) or BSAI (clamp-lock) models instead.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the effective stroke by up to 10 mm. This provides a usable travel window of 35 to 45 mm without changing the cylinder itself.
At 0.7 MPa, the push force increases to 563 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.