
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X45-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 45mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X45-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 45mm stroke that can be fine-tuned backward by up to 30mm, creating a usable travel window of 15 to 45mm.
The carbon steel piston rod has an M10x1.25 thread, and the body uses a PT tapered port. Unlike a fixed SAI cylinder, this model lets you dial in the retract end-position during commissioning without adding external stops. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X45-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position from 15 to 45mm during machine commissioning without swapping cylinders or adding external mechanical stops.
Quickly adjust the stroke length on automated lines when handling slightly different product sizes that require varying travel distances.
If your setup needs slightly more thrust, stepping up to the 40mm bore yields 628N. The SAIJ32X45-30 is selected specifically for its 15 to 45mm adjustable travel window, allowing on-the-fly changes during product changeovers.
Mounting options are limited to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles. Because it lacks a magnet, it does not support CMSE or DMSE sensors. For load-holding without continuous air pressure, consider the SAIL or BSAI series instead, as this adjuster is not a lock.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 30mm from the 45mm nominal length. This creates a usable travel window of 15 to 45mm, letting you fine-tune the end position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.