
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X500-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X500-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 460 to 500 mm, allowing you to dial back the nominal 500 mm stroke by up to 40 mm during commissioning.
This model uses an extruded aluminum barrel with sensor grooves on both sides for CMSE or DMSE switches. The rear stopper mechanism allows fine end-position tuning without swapping the cylinder or adding external stops. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the retraction end position up to 40 mm during product size changes without swapping cylinders or adding external stopper blocks.
Ideal for diverter arms where the exact 460 to 500 mm travel window must be tweaked on-site to align with varying package dimensions.
Dial in the precise end-of-stroke position during initial machine setup to absorb minor mechanical tolerances and prevent hard impacts.
The adjustable stroke is ideal for product changeovers where the precise retraction end position varies. Because the stroke is 500 mm, an external guide is recommended to manage side loads on the 12 mm rod. If your machine requires the load to be held without live air pressure, select the SAIL or BSAI series instead, as the SAIJ rear adjuster is a travel stop, not a lock. For ISO 15552 replacement, match the 32 mm bore, 500 mm stroke, PT tapered port, and the required mounting accessory.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from 500 mm down to 460 mm. It sets the retract end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.