
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X55-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 55mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X55-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 45-55 mm usable travel window by allowing you to dial back the 55 mm nominal stroke by up to 10 mm.
This adjustable stopper lets you fine-tune end positions at commissioning without swapping the cylinder or adding external stops. It uses a PT tapered port and a 12 mm carbon steel rod with an M10x1.25 thread. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X55-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 45-55 mm end-stop during initial commissioning to perfectly position a pick-and-place head without machining new spacers.
Quickly adapt a diverter stroke by up to 10 mm on the fly when packaging lines switch to a slightly different carton width.
Use the rear screw to fine-tune the retract position for delicate clamping tasks where a fixed 55 mm stroke would apply too much pressure.
Choose this 32 mm bore cylinder when you need precise end-position tuning during machine setup or product changeover, rather than a fixed-stroke SAI. Conversely, if you need to hold a load without live air pressure, this adjuster acts only as a travel stop, so you should look at the SAIL or BSAI locking cylinders instead.
For a seamless ISO 15552 dimensional replacement, match the 32 mm bore, 55 mm stroke, 10 mm adjustment range, PT port thread, and standard carbon steel rod. Because the stroke is under 300 mm, side-load stress is minimized, but long unsupported loads still need an external guide.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
The rear adjuster acts as a mechanical stopper that lets you shorten the 55 mm nominal stroke by up to 10 mm, creating a 45-55 mm usable travel window. It is a travel stop, not a lock, so it cannot hold a load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.