
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X55-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 55mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X55-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 15 to 55 mm, allowing you to dial back the nominal 55 mm stroke by up to 40 mm during commissioning.
This bore 32 unit uses a G1/8 port and a 12 mm carbon steel rod with an M10x1.25 thread. The extruded aluminum barrel includes sensor grooves on both sides for CMSE or DMSE switches. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB and CA styles found on other series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X55-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 15-55 mm travel window during product size changes without physically replacing the cylinder or adding external stopper blocks.
Dial in the exact retract distance at commissioning to compensate for mechanical tolerances in the fixture setup.
Adjust the rear stopper screw to alter the effective stroke length for testing different sensor trigger distances.
If your setup needs less than 345 N of pull force, stepping down to a smaller bore is advisable, but for slightly higher force demands, a 40 mm bore provides 528 N of pull. The adjustable stroke is ideal for product changeovers where the exact end position varies, saving you from swapping out a fixed-stroke SAI cylinder.
The rear screw acts purely as a travel stop to set the retract position, not as a locking device. It cannot hold a load without live air pressure. For applications requiring true fail-safe load holding, consider the SAIL series with an air-released lock or the BSAI clamp-lock cylinder. Since the stroke is under 300 mm, side-load stress on the 12 mm rod is minimal, though external guides are still recommended for heavy lateral loads.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
The rear adjuster screw lets you shorten the 55 mm nominal stroke by up to 40 mm, creating a usable travel window of 15 to 55 mm. The adjuster functions as a mechanical stop to set the end position and requires live air to hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.