
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X550-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 550mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X550-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window between 520 and 550 mm. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
This adjustable design eliminates the need to swap cylinders or bolt on external stops during machine commissioning. The rear screw acts purely as a travel stop for end-position tuning and does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 520 to 550 mm travel distance during setup without machining custom spacers or changing the cylinder.
Quickly adjust the end stop to accommodate varying package sizes on a packaging line, reducing downtime between runs.
Fine-tune the retract position precisely to meet tight tolerances on light-duty assembly equipment.
The 30 mm adjustment range is ideal for product changeovers where exact end-of-stroke positioning varies slightly. Because this model features a 550 mm stroke, the 12 mm rod requires an external guide to prevent excessive side-loading and premature seal wear.
When specifying a replacement, verify the 32 mm bore, 550 mm nominal stroke, 30 mm adjustment range, PT G1/8 port, and standard carbon steel rod. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets found on some other ISO 15552 variants.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 30 mm, creating a usable travel window of 520 to 550 mm. The adjuster is a mechanical stop and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.