
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X600-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X600-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 32 mm bore and a 600 mm nominal stroke, yielding a usable travel window of 500 to 600 mm. This built-in adjustability allows you to dial in the exact retract end-position during commissioning without swapping cylinders or adding external stops. The carbon steel rod and PT tapered port threads are standard.
Generating 402 Newtons of push force at 0.5 MPa, this unit is designed for lighter-duty applications. It includes a magnet (-S) for position sensing with AirTAC CMSE reed or DMSE electronic switches fitted into the dual-side sensor grooves on the extruded aluminum barrel. The adjustable stopper and variable air cushions control deceleration, but neither will hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within a 500-600 mm window during machine commissioning to accommodate different product lengths without mechanical rebuilds.
Quickly adjust the stroke by up to 100 mm on a packaging line when switching between box sizes, ensuring precise stopping without replacing the actuator.
Use the 600 mm stroke to move components across a workstation, relying on the rear stopper to fine-tune the final resting place for delicate assembly tasks.
If your setup demands greater thrust, stepping up to the 40 mm bore yields 628 N. The 100 mm adjustment range is highly useful for product changeovers on a line, letting you shift the retract distance by up to 100 mm on the fly. For load-holding without continuous air pressure, this cylinder is insufficient; you would need an external rod lock or a related type like the SAIL (air-released lock) or BSAI (clamp-lock).
Because this cylinder features a 600 mm stroke, the 12 mm rod requires external guidance to prevent excessive side-loading and premature seal wear. To match this ISO 15552 cylinder exactly, confirm the 32 mm bore, 600 mm stroke, 100 mm adjustment, PT port thread, and the -S magnet. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
At the maximum 1.0 MPa pressure, it can output up to 82 kgf.
The rear adjuster acts as a mechanical stop, allowing you to shorten the effective stroke from its 600 mm nominal length down to as little as 500 mm. This creates a 500-600 mm travel window for fine-tuning the end position at commissioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.