verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-10S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X70-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 70mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke70 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$63.70 $71.20Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-10S

The AirTAC SAIJ32X70-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear stopper screw, you can trim the effective travel back by up to 10mm, creating a precise 60-70mm usable stroke window without needing external stops.

This adjustable-stroke design is perfect for fine-tuning end positions during machine commissioning or product changeovers. The extruded aluminum barrel includes sensor grooves on both sides, and because this SKU includes a magnet (-S), it supports AirTAC CMSE reed and DMSE electronic solid-state switches. It utilizes a PT tapered port thread and operates at speeds between 30-800mm/s.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-10S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X70-10S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke70 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-10S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×70Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-10S Is Used

tune

Precision End-Stop Tuning

Dial in the exact 60-70mm travel distance during machine commissioning to perfect part seating without swapping cylinders.

settings_input_component

Product Size Changeover

Quickly adjust the rear stopper screw by up to 10mm to accommodate slight variations in product dimensions on the line.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-10S the Right Cylinder?

Choose this 32mm bore when an application requires precise mechanical end-position tuning rather than a fixed-stroke SAI cylinder. If your setup demands greater thrust, stepping up to the 40mm bore increases push force to 628N at 0.5 MPa. Remember that the rear adjuster acts solely as a travel stop and does not hold the load without live air; for pneumatic locking without pressure, consider the SAIL or BSAI series.

For an exact ISO 15552 replacement, match the 32mm bore, 70mm stroke, 10mm adjustment range, PT port thread, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets.

AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-10S FAQ

At 0.7 MPa, the push force increases to 563N.

The rear adjuster screw allows you to shorten the nominal 70mm stroke by up to 10mm, providing a usable travel window of 60-70mm for fine-tuning the end position at commissioning.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X70-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ32X70-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.