
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X700-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X700-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 670-700 mm usable travel window by allowing you to trim up to 30 mm from the 700 mm nominal stroke.
This extruded aluminum barrel design integrates variable air cushions at both ends and uses a PT tapered port. The rear stopper mechanism is strictly for end-position tuning during commissioning; it does not hold the load without live air pressure. For load-holding requirements, explore the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 670-700 mm travel window during product size transitions without replacing the cylinder or adding external stops.
Fine-tune the retract end position at commissioning to compensate for mechanical tolerances in your fixture.
Set precise variable end-stops for automated assembly equipment requiring exact 32 mm bore positioning.
The adjustable stroke is ideal for machine changeovers, allowing you to dial in the exact end-stop without swapping cylinders or adding external stops. Because the 700 mm stroke is long for a 32 mm rod, an external guide is recommended to manage side loads and prevent rod binding. This model uses the PT port thread, carbon steel rod, and omits the -S magnet. It supports the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
At 0.7 MPa the push force is 563 N.
The rear adjuster screw lets you shorten the 700 mm nominal stroke by up to 30 mm, creating a 670-700 mm travel window. It acts as a stop, not a lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.