verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-30

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X80-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke80 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$63.24 $70.74Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-30

The AirTAC SAIJ32X80-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 50-80mm usable travel window from its 80mm nominal stroke.

It features a 12mm carbon steel rod with an M10x1.25 thread and PT tapered G1/8 ports. Unlike fixed-stroke SAI models, this version allows up to 30mm of retract adjustment via an external stopper screw. Note that this rear stopper acts strictly as a travel limit and deceleration aid, not a load-holding lock; maintaining position requires live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-30 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X80-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke80 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-30

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×80Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-30 Is Used

tune

Machine Setup Calibration

Dial in the exact 50-80mm travel window during initial commissioning to perfectly seat parts without machining custom external stoppers.

settings_input_component

Product Changeover

Quickly adjust the retract end-stop by up to 30mm on the fly when switching between different sized products on the same conveyor line.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-30 the Right Cylinder?

The 30mm adjustment range is ideal for product changeovers on a line, letting you dial in the exact end-stop without adding external shims. For any load-holding requirements without continuous air pressure, consider the SAIL or BSAI series instead, as the SAIJ adjuster cannot lock the load.

When replacing an ISO 15552 cylinder, match the 32mm bore, 80mm stroke, 30mm adjustment, PT port thread, and standard carbon steel rod. The SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB and rear pivot options. Since this unit lacks the -S magnet option, it is not compatible with CMSE reed or DMSE electronic sensors.

AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-30 FAQ

The rear adjuster screw acts as an external stopper that lets you shorten the effective travel from the nominal 80mm down to 50mm, creating a 50-80mm usable window. It functions as a travel limit and deceleration aid, not a lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X80-30

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ32X80-30 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.