
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X900-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 900mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X900-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. The built-in rear stopper allows you to fine-tune the effective travel window from 870mm to 900mm, providing exact end-position control without adding external stops.
Because the 900mm stroke is long relative to the 32mm bore, an external guide is recommended to prevent rod sagging and side-load damage. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE or DMSE switches if needed later. Mounting options include the SAIJ subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 870-900mm travel window during product size changes to set exact end-stops without physically replacing the cylinder.
Fine-tune the retract position at commissioning using the rear adjuster to perfect the placement of long-travel parts.
Adjust the stroke on the fly for different package lengths moving down a line, using the 30mm trim to avoid adding external hard stops.
If your application requires more power, stepping up to the 40mm bore yields 628N. The 30mm adjustment range is ideal for product changeovers, letting you dial in the exact end-stop at commissioning rather than swapping a fixed-stroke SAI cylinder.
Remember that the rear adjuster acts only as a travel stop, not a lock; it cannot hold a load without live air pressure. For drop-pressure load holding, consider an external rod lock or AirTAC SAIL and BSAI cylinders. This SAIJ32X900-30 uses a PT tapered G1/8 port and operates at speeds of 30-800mm/s.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
The rear adjuster acts as an external stopper that trims the effective travel. For this SAIJ32X900-30 model, it creates a usable stroke window of 870-900mm, allowing you to shorten the stroke by up to 30mm without altering the cylinder itself.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.