
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X95-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 95mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X95-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear screw, you achieve an exact usable travel window of 85-95mm without adding external stops.
This adjustable-stroke design is perfect for fine-tuning end positions during commissioning. It includes a magnet for CMSE and DMSE sensors, utilizing the extruded aluminum barrel's dual sensor grooves. Remember that the rear adjuster acts as a travel stop for deceleration, not a lock, so live air is required to hold the load.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X95-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 85-95mm travel distance during machine commissioning to perfectly seat delicate parts without mechanical shims.
Quickly adjust the rear stopper on the line when switching to a slightly different product size, reducing setup downtime.
Choose this 32mm bore when you need precise end-position tuning at machine setup, rather than a fixed-stroke SAI cylinder. Because the 95mm stroke is under 300mm, side-load stress is minimal, though the 12mm rod still requires alignment.
For a true ISO 15552 replacement match, ensure you specify the 32mm bore, 95mm stroke, 10mm adjustment range, PT port thread, and the -S magnet option. It supports the reduced SAIJ mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. If you need to hold position without air pressure, select a SAIL or BSAI cylinder instead.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
The rear adjuster screw allows you to shorten the 95mm nominal stroke by up to 10mm, creating an adjustable travel window of 85-95mm. The adjuster acts as a mechanical stop for end-position tuning and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.