
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X95-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 95mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X95-75-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 95 mm stroke that can be dialed back by up to 75 mm, yielding a highly flexible 20-95 mm usable travel window for precise commissioning.
This -S variant includes a magnet for position sensing via AirTAC CMSE reed or DMSE electronic switches. The extruded aluminum barrel integrates sensor grooves on both sides. A carbon steel piston rod with an M10x1.25 thread handles moderate side loads, while the rear adjuster acts purely as a travel stop, not a load lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X95-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance between 20 and 95 mm during machine setup to accommodate varying material thicknesses without adding external mechanical stops.
Quickly readjust the stroke on packaging or sorting lines when switching between different product formats, minimizing downtime and tooling changes.
The 75 mm adjustment range is exceptional for adapting a single cylinder to multiple product sizes without swapping hardware. If your process demands less than 345 N of pull force, a smaller fixed-stroke SAI might suffice, but this SAIJ provides unmatched setup flexibility.
For load-holding without live air pressure, note that the rear adjuster only halts travel; you must use an SAIL pneumatic lock, a BSAI clamp-lock, or an external rod lock. To replace this unit, match the 32 mm bore, 95 mm nominal stroke, PT tapered port threads, and the -S magnet option. The mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
The rear adjuster acts as a mechanical stop that shortens the effective stroke. For this model, you can trim the 95 mm nominal stroke back by up to 75 mm, providing a usable travel window of 20 to 95 mm. It does not lock the load without live air.
The -S suffix indicates a built-in magnet compatible with AirTAC CMSE reed and DMSE electronic sensors mounted in the dual barrel grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.